Trijicon 3x9 Mil Dot reticle
Trijicon AccuPoint 3-9x40 Riflescope is perfect for hi-speed "any light" shooting, with pinpoint accuracy.
The advanced fiber-optic/tritium aiming-point illumination provides the Trijicon Accu-Point fast target-acquisition and extends available shooting hours. The dual-illumination fiber-optic system automatically adjusts aiming-point brightness to existing light conditions. This provides hunters optimum aiming-point illumination and ideal reticle/target contrast. The result: lightning-fast precision aiming in any light without failure-prone batteries for maximum shooting success.
Comes complete with LaRue Tactical LT104 QD mount, installation tools and instructions.
Colors: Amber, Green
- Magnification: 3x-9x
- Reticle: Mil-Dot with illuminated center dot.
- Eye Relief: 3.6 to 3.2 inches
- Exit Pupil: 13.3 to 4.4 mm
- Field of View: 6.45 to 2.15 degrees
- Field of view @100 yds.: 33.8 feet to 11.3 feet
- Adjustment Increments: 4 clicks per inch @ 100 yds
- Length: 12.2 inches
- Weight: 12.8 oz.
About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.
Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).