Rifle Scope Mil Dot
and ADM 20 MOA mount on my AR10;
Primary Arms had this combo listed on their ebay site as an already mounted pair for under $190. I've been wanting a good ADM mount and the 20 MOA fit what I had been thinking about so I grabbed the set.
I quickly realized that this set had never been used, must have been for a display. The screws were just finger tight on the rings and the crosshairs were far from level. In less than 10 minutes I had the crosshairs level, the provided thread locker applied, and the rings torqued down.
This image is hidden for guests. Please log in or register to see it.The finish on the scope looks good but the lens caps don't look like they will last long, very cheap in appearance. The glass is decent, not there with my Bushnell Elites but plenty good for the money. Adjustment clicks are a bit soft but easily felt if not heard. I still need to remove the screw and reset the turrets to zero so I can't say how that will go yet. I didn't take the time to do a real accurate tracking test but a quick box on the 12 inch targets I had showed it to be adequate. My accuracy suffers when using the horribly designed shooting positions at the local range so any complaints could relate to that.
The biggest issue I have with the scope is the small and sensitive eye box. Even with the parallax set correctly the slightest change of position moves the crosshairs an inch or better on the target. Neither of my Bushnell Elites even come close to this drastic movement, not sure how or why this is but it is. With more familiarity on the scope this should become less of an issue but at this point I don't see this scope deserving a spot on my ArmaLite.
Even with the difficulty I was having putting out decent groups I decided to give the ADM mount a re-zero test. I shot ten rounds, Fiocchi Exacta 175 gr match, taking the mount off and putting it back between each shot; The first 5 stayed nice and tight but then I started getting spasms in my back from the awkward position so things widened out a bit. I'm pretty confident the mount will do its part if I can.