4-20x50 Mil Dot 30MM
What optics for my R700 .308

4-20x50 Mil Dot 30MM

Trijicon’s longest-range scope ever, it gives tactical shooters, varmint hunters and law enforcement snipers the ability to accurately extend their range in any light.

  • Advanced fiber-optics and tritium aiming-point illumination speeds target acquisition and extends available shooting hours
  • Dual-illumination system automatically adjusts aiming-point brightness to existing lighting conditions
  • Manual brightness override allows shooters to easily adjust the reticle to suit their preferences
  • 30mm tube offers a greater range of mounting options
  • Rugged, aircraft-quality, hard-anodized aluminum body offers all- weather protection
  • Unmatched long eye relief protects against the recoil of higher caliber rifles
  • Easy-to-use external turret controls for windage and elevation adjustment
  • Side parallax adjuster for enhanced accuracy at long range

Magnification 5x-20x
Objective Size 50
Bullet Drop Compensator No
Length (In) 13.6 w/out sunshade 16.6 w/ sunshade
Weight (oz) 26.9 w/out sundshade 29.4 w/ sunshade
Illumination Source Fiber Optics & Tritium
Reticle Pattern Mil-Dot Crosshair
Day Reticle Color Green
Night Reticle Color Green
Eye Relief 3.8 to 4.1
Exit Pupil 10 to 2.5
Field of View @ 100 yards (ft) 19.1 to 5.1
Adjustment @ 100 yards (clicks/in) 1/4 (0.25) MOA per click
Tube Size 30mm
Housing Material 6061-T6 aluminum, hard coat anodized per MIL-A-8625, Type III, Class 2 dull & non reflective
Adjustment Range ± 20 MOA (± 5.9 mils) minimum

About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.

Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).

You might also like
BARSKA 3-9x42 IR 2nd Generation Sniper Riflescope
BARSKA 3-9x42 IR 2nd Generation Sniper Riflescope
Barska 3-9x42mm Illuminated Sniper Riflescope
Barska 3-9x42mm Illuminated Sniper Riflescope ...
Leupold Leupold Mark 4 LR/T 6.5-20x50mm (30mm) M1 Illum Mil Dot
Sports (Leupold)
  • 30mm 14.5 23 oz
  • 6.5x-20x 50mm
  • Matte Black Illuminated Mil Dot 1/4 MOA @ 100 yds
  • 3.6 30mm
  • 6.5x-20x
Related Posts